Problem: On a trip home from North Wales, the vacuum hose in my GT6 came loose and fell on the exhaust, melting and fusing it. Nasty sluggish acceleration resulted.
Solution: I had no tools besides a knife and no spare hose, but DID have a small can of WD40 in the boot.
After cutting the melted ends off both pieces of the existing hose, and cutting a 30mm peice of the WD40 can nozzle, I softened the hose over the exhaust and pressed in the nozzle. A test blow though the spliced hose showed it would allow the vacuum advance to operate and all was well for the remaining 150miles home.
Please let me know if this post was useful with a click, be honest 🙂